Is foam coil cleaner safe for aluminium and copper fins?

Yes. EcoCare’s aerosol is a non-acid, non-chlorinated AC coil cleaner that is fin-safe on aluminium and copper when used as directed.

Do I need to rinse after using an AC coil foam cleaner?

Yes. Rinse with low-pressure water after 3–5 minutes of dwell time to flush loosened soil without bending fins.

Can I clean coils without removing the indoor unit?

In many window and split ACs the evaporator coil is accessible after removing the filter and front cover. Isolate power, apply foam from 15–25 cm, allow dwell and rinse with low pressure ensuring drainage.

How often should AC coils be cleaned in India?

Homes: every 6–12 months. Dusty/coastal/humid sites or commercial HVAC may require more frequent preventive maintenance.

Which coils can I use it on—evaporator or condenser?

Both. The aerosol suits indoor evaporator and outdoor condenser coils of window & split ACs and light-commercial HVAC when used as directed.

Will coil cleaning improve cooling and reduce electricity consumption?

Yes. Clean coils restore heat transfer and airflow, helping the compressor work efficiently. Results depend on overall system condition.

How many coils can one 600 ml can clean?

Typically 1–2 indoor coils per can depending on soil load and fin density.

Is EcoCare a manufacturer in India? Do you supply OEM/private label?

Yes. EcoCare manufactures AC foam coil cleaner in India and offers OEM/private-label and bulk supply.

Does the foam remove mould and biofilm?

The clinging foam helps lift organic soil and biofilm, reducing odour. For disinfection, use an appropriate sanitiser per local regulations after cleaning.

When should I use acidic coil cleaners instead of foam?

Only for severe scale under expert supervision due to higher corrosion risk. For routine maintenance on aluminium/copper fins, foam aerosol is recommended.

AC Coil Foam Cleaner (Aerosol) – Safe for Aluminium & Copper Fins

EcoCare AC Coil Foam Cleaner (Aerosol) is a high-foaming HVAC coil cleaner formulated to be safe for aluminium and copper fins. It penetrates dust, grease, and biofilm on evaporator and condenser coils in split and window ACs, helping restore airflow and cooling efficiency. As a manufacturer in India, we support OEM/private-label and bulk programs with technician-friendly directions and clear rinse guidance. Regular use can reduce compressor load and improve indoor air quality.

Buy Now

Request Quote

Video

video

Anchor 2

Before Cleaning

Generated Image October 09, 2025 - 7_49A

Foaming & Cleaning

After Cleaning

Buy Now

EcoCare AC Coil Foam Cleaner (Aerosol) is the fin-safe, non-acid HVAC foam technicians trust. It deep-cleans aluminium and copper coils, cuts grease and dust, and delivers faster cooling and breathe-easy air. Made in India and easy rinse-off, it speeds service, protects fins, boosts performance, and elevates professional reliable results daily.

AC COIL CLEANING FUNDAMENTALS

Understanding Your AC System Components

🔹 Evaporator Coils (Indoor Units)

Absorb heat from indoor air to create cooling comfort. Located inside your home, these coils require regular maintenance for optimal heat transfer efficiency.

🔹 Condenser Coils (Outdoor Units)

Release absorbed heat to the external environment. Exposed to weather and debris, these coils need frequent cleaning to maintain performance.

🔹 Why Regular Cleaning Matters

Clean coil surfaces ensure maximum heat transfer efficiency, proper refrigerant flow, and reduced energy consumption.

Common Contamination Sources

Download technical Information

How To Use AC Foam Cleaner

Clean HVAC evaporator & condenser coils with EcoCare AC coil foam cleaner (aerosol spray). Total time ≈ 10 minutes.

Important: Power off and isolate the AC. Use gloves and eye protection; wear a mask in poorly ventilated areas. Keep aerosol away from heat/flame.

1. Power Off & Expose Coils

Switch off mains. Remove filters and panels. Vacuum loose dust so the foam reaches the fins.

4. Dwell Time: 3–5 Minutes

Let the clinging foam penetrate dust, grease, and biofilm. Do not allow it to dry on the surface.

2. Shake Can & Test Spray

Shake well for 10–15 seconds. Test a small area to confirm fin safety and spray pattern.

5. Rinse (Low Pressure)

Rinse with low-pressure water to flush loosened soil without bending aluminium/copper fins.

3. Apply Foam (15–25 cm)

Hold the AC coil cleaner spray 15–25 cm from the surface and coat the fins evenly.

6. Dry, Reassemble & Restart

Allow drainage, refit filters/panels, restore power, verify airflow and cooling.

how to use

Technical Specification

Product Data

Form-Aerosol foam (spray)

Net content-600 ml

Appearance-White, stable foam

pH (as supplied)-Alkaline

Compatibility-Safe on aluminium & copper fins (as directed)

Propellant-Hydrocarbon aerosol (non-chlorinated)

Coverage-Typically 8–10 indoor coils per can (soil dependent)

Fragrance-Sweet Citrus

Shelf life-12 months (cool, dry storage; keep below 50 °C)

Intended use: HVAC coil cleaner spray for residential & commercial evaporator/condenser coils.

Safety & Handling

Non-acid, non-chlorinated AC coil cleaner; use as directed.
Use gloves and eye protection; wear a mask in poorly ventilated areas.
Power off equipment before application; avoid ignition sources.
Rinse with low-pressure water; prevent fin damage and ensure drainage.
PRESSURIZED CONTAINER: do not puncture or incinerate; keep away from heat and sunlight.
Keep out of reach of children. If in eyes/skin, rinse with water; seek medical advice if irritation persists.

Buy In Bulk